Menu
0
    0

    Your Cart is Empty

    Quick Start Guide

    Charge the Bluetooth amplifier and pair with smart device (phone, tablet)

    Select your favorite music or sound source (Dreampad Sleep, Apple Music, Spotify or other)

    Plug your Dreampad product into the Bluetooth amplifier

    Or, skip the Bluetooth and connect your phone directly to Dreampad product

    Getting Started

    Pillows

    Your Dreampad pillow is ready to go right out of the box. Remove from the bag and unzip the small pocket on the side of the pillow. Inside is a 6-foot white cord with a plug on the end which will serve as your connector to the audio technology inside the pillow. 

    Make sure the dragonfly logo on the Dreampad pillow is FACING DOWN.


    Aurras

    For the Aurras, simply remove from packaging, place it directly under your existing pillow and follow instructions below for setting up Bluetooth. 

    Make sure the Aurras logo is FACING UP.


    Playing Content

    Your phone, iPad or other playback device will provide the content for your Dreampad Pillow or Aurras.  


    The Dreampad connects to your phone either through BLUETOOTH or WIRED.


    You can use any music or sound source to play music through your Dreampad products. Play music from your playlists in Apple Music, Spotify, or other apps with your favorite sleep sounds. Try the Dreampad Sleep app, available on either the Apple App Store or Google Play. Please note that the Dreampad Sleep app is NOT REQUIRED to operate the Dreampad pillow or Aurras.  See Sleep Tips for more information on music and improving sleep in general.


    Connecting to Bluetooth

    You can connect the Dreampad pillow or Aurras to your phone through the included Bluetooth adaptor/amplifier. Please follow the detailed instructions below.


    Connect Using Bluetooth





    Please watch this short video and read the instructions below before pairing your Circadian Bluetooth Amplifier to your phone.



    Charging

    CHARGE your Bluetooth device as soon as you receive the product to make sure it is fully charged before use.

    CONNECT the charging port with any USB charging adaptor.  Please make sure to fully insert the micro-USB into the port.

    LOOK FOR THE BLUE LEDlight, which indicates that charging has started.  It should be a solid blue.

    The adaptor is fully charged when the LED indicator turns off.  With a 2.4 V charger, charging should take 1 - 2 hours.


    Pairing

    Go to SETTINGS>BLUETOOTH on your phone and make sure Bluetooth is on.

    POWER UP the Dreampad Bluetooth device. Press and hold the power button until the blue LED Indicator turns on.  Do not hold the button down for too long or the device will shut down.

    The LED LIGHTwill flash and DREAMPAD will appear on your phone. Depending on the version and model of your phone, it may take up to a minute for the name to appear.  Please also note that the discovery process may take longer if multiple devices (phones, iPads) are turned on and in discovery mode.  

    TAP DREAMPAD on your phone. The light on the Bluetooth device will turn to solid blue. and your phone should indicate that the Dreampad device is paired. If the name does not appear, try turning off Bluetooth mode on your phone and then turning back on.  

    MULTIPLE PHONES OR IPADS: Please note that the Circadian Bluetooth device will try to pair automatically to the last smart device (phone or iPad) that it was paired to. If you paired to one phone and then try to pair to a different (second) phone, the Bluetooth device will search for the first phone and will not pair to the second phone. You must first DISCONNECT (or FORGET) the device on the first phone, and then pair to the second phone.

    Reconnecting

    After the first pairing the Bluetooth device should pair automatically with your phone after powering on.  The blue light will flash and then turn solid.  If for some reason the light continues to flash more than three times, check the Bluetooth setting on your phone.  If Dreampad shows as Not Connected, tap on Dreampad to connect.

    Note the previous instruction regarding MULTIPLE PHONES.

    If you receive a call

    If your phone is paired to the Bluetooth device and playing audio, and you receive a phone call, the phone will revert to the handset and will pause the audio you were playing.  The Bluetooth device should remain paired to your phone, with a solid blue light.  Once your phone call is concluded, you will need to manually restart the audio on your phone by hitting the play button.  You should not need to reset the Bluetooth pairing.

    If you do not want the audio to be interrupted, you can set your phone to Airplane Mode and the Bluetooth connection will remain on.

    Powering Down

    PRESS AND HOLD the power button for about one second.

    The Blue LED Indicator will flash three times and go off.

    TaoTronics TT-BR05 Bluetooth

    Charging

    Connect the charging port with any USB charging adaptor or active computer USB port

    Charging will start automatically with the LED indicator turning green. The adaptor is fully charged when the LED indicator turns off.

    Pairing

    Make sure the receiver and your smart device are next to each other (within about 3 feet).  The first time you use the receiver, press and hold the Power Button until the LED indicator flashes red.

    Activate Bluetooth on your smart device and search for TaoTronics TT-BR05 within the search results. Tap on the name to connect. Once connected, the indicator will flash blue.

    Helpful Tips

    A 6 ft. extension is included with the Dreampad pillows, if you wish to keep the Bluetooth adaptor and/or smart device further away or at our bedside.


    Set your smart device to Airplane Mode to prevent calls from waking you up


    If you are prone to motion sickness, begin using the Dreampad pillow or Aurras slowly. Start at a low volume for short sessions (5-20 minutes) for the first week. Each following week, lengthen use gradually until you reach your desired listening time.


    Care Instructions

    The Dreampad Pillow contains custom-made transducers and should not be machine washed. Spot clean only, and use a washable pillow cover.


    The Aurras should not be machine washed. Spot clean only.


    Warnings

    Do not leave children under 1 year of age unattended while using Dreampad products. Dreampad products are patented and protected by US intellectual property law. It is not a medical device and makes no medical claims.


    Warranty

    Dreampad products are warrantied for one (1) year from the date of purchase against manufacturer defects. Coverage is valid only with proof of purchase. Alteration of Dreampad products will void warranty.

    Trying Dreampad products is risk-free. 

    Return it within 30 days and we will refund your purchase and pay for return shipping. 

    Get the Latest Sleep Science and More